All Products
-
Industrial Rubber Sheet
-
Silicone Rubber Sheet
-
High Temperature Rubber Sheet
-
Silicone Tube Extrusion
-
Silicone Rubber Washers
-
Polyurethane Coupling
-
PTFE Packing
-
PTFE Gasket Tape
-
PTFE Coated Fiberglass Fabric
-
PTFE Mesh
-
PTFE Tubing
-
Rubber Shock Mounts
-
Colored Plastic Sheet
-
Nylon Plastic Rod
-
Oil Proof Paper
-
EPDM Foam Sheet
-
PVC Conveyor Belt
-
Industrial Oil Seal
-
PTFE Cutter Pad
Keywords [ silicone gasket sheet ] match 100 Products.
PTFE Gasket Sheet with 8-43mm Outer Diameter and 1-3mm Thickness for 0-14 pH Range Applications
| Outer Diameter: | 8-43mm |
|---|---|
| Elongation: | 400% |
| Thickness: | 1-3mm |
Close Cell Silicone Sponge Rubber Sheet 10-40 Shore A 0.5-1.0g/cm3
| Material: | Silicone Foam |
|---|---|
| Cell: | Close Cell |
| Surface: | Impression Fabric |
Waterproof Non-Toxic Silicone Heater Pad with 220-240V Voltage for Uniform Heating
| Material: | Silicone Sponge +wire |
|---|---|
| Voltage: | 220-240V |
| Cable: | Custom |
Tensile Strength 7.0-12.0Mpa Silicone Rubber Sheet Industrial Grade Tear Strength 26-42Nmm Durable Flexible Material
| Grade: | Industrial Grade, Food Grade, Medical Grade, FDA Grade With Platinum Cured And Postcured |
|---|---|
| Quality: | High Tear Resistant, Middle Tear Resistant, General Tear Resistant |
| Elongation: | 300%-720% |
Extruded Silicone Sponge Cord 10-30 Shore A for Industrial Seals
| Produced: | Extruded |
|---|---|
| Color: | Dark Red, Milk White, Grey, Black |
| Surface: | Smooth Shin |
High Temperature Resistant Silicone Sponge Extrusion with Good Wear Resistance and Tensile Strength 100-200psi
| Material: | Silicone Sponge Rubber |
|---|---|
| Color: | Dark Red, Milk White, Grey, Black |
| Surface: | Smooth Shin |
Silicone Rubber Sheet 1-50m with 26-42N/mm Tear Strength
| Aging Resistance: | Excellent |
|---|---|
| Tear Strength: | 26-42N/mm |
| Hardness: | 10, 20, 30, 40, 50, 60, 70, 80+/-5shore A |
Silicone Rubber Sheet Roll 1-50m Length 0.1-50mm Thickness
| Length: | 1-50m |
|---|---|
| Hardness: | 10, 20, 30, 40, 50, 60, 70, 80+/-5shore A |
| Tensile Strength: | 7.5-12.0Mpa |
Heat Resistant Silicone Foam Rubber Sheet 1-50mm Thick 180℃
| Application: | Special For Ironing Table |
|---|---|
| Surface: | Double Impression Fabric |
| Tensile Strength: | 200psi |
Silicone Rubber Sheet 3mm Thick 0.1-3.6m Width 7.5-12.0Mpa Tensile
| Elongation: | 350%-720% |
|---|---|
| Color: | Translucent, White, Black, Red, Blue, Etc. |
| Tear Strength: | 26-42N/mm |

