PTFE SS Oil Seal , PTFE SS Oil Seal for Air Compressor Oil Seal
This shaft oil seal comprises of a stainless steel casing and PTFE shaft seal liip. There are many types of the seal lip: single lip,double lips and three lips or with no lip,etc.
1) Low friction,power saving.
2) It can replace the traditional oil seals and can be applied in condition of lubrication shortage,high speed,high temperature,strong corrosive medium.
|Medium||oil,bio oil,water,air and others|
air compressor,engineer, presses.etc
Suitable medium: steam, hydrogen, natural gas, gas, oil, acid, alkali, salt solution.
1.A good compression ratio and elasticity.
2.With plastic appropriate, after pressing can adapt to the sealing surface and sealing surface uneven fill the gap, to ensure good sealing performance with the temperature and pressure in the system of alternating case.
3.With excellent corrosion resistance, not to be damaged in some extreme medium, does not have the expansion and contraction.
4.Under the condition of high temperature softening, does not creep; under the condition of low temperature hardening, does not shrink.
5.Have sufficient strength, when external load conditions, not be crushed; at high temperature, not blown out.