| Material | Virgin Nitrile + EP Fabric Or Polyester Fabric |
|---|---|
| Quality | Premium Grade |
| Color | Black |
| Surface | Smooth |
| Tensile Strength | 9-16Mpa |
| Thickness | 1.5-7.0mm |
|---|---|
| Tensile Strength | 8Mpa |
| Application | Sealing |
| Density | 0.7-1.0g/cm3 |
| Width | 2.0-1500mm |
| Color | Yellow,black,red, |
|---|---|
| Surface | Smooth |
| Size | Build Mould Per Buyer's Drawings |
| Hadrness | 80-98 Shore A |
| Tensible Strength | 55Mpa For Polyester |
| Color | Yellow,black,red, |
|---|---|
| Surface | Smooth |
| Size | Build Mould Per Buyer's Drawings |
| Hadrness | 80-98 Shore A |
| Tensible Strength | 55Mpa For Polyester |
| Material | Virgin Silicone |
|---|---|
| Quality | Middle Tear Resistant |
| Surface | Smooth/impression Fabric |
| Color | Blue, Translucent |
| Tensile Strength | 7.5Mpa |
| Tear Resistance | Good |
|---|---|
| Color | Yellow, Red, Purple, Green, Black, Beige Etc. |
| Flexibility | High |
| Temperature Range | 120°C |
| Flame Resistance | Good |
| Material | Silicone Sponge |
|---|---|
| Color | Red,white,black,white,grey |
| Cell | Close Cell |
| Hardness | 10-40 Shore A |
| Tensile Strength | 100-200Psi |
| Material | Virgin Fluorubber |
|---|---|
| Color | Black, Green, Red, White |
| Surface | Smooth |
| Tensile Strength | 8Mpa |
| Hardness | 75shore A |
| Tensile Strength | 6-12Mpa |
|---|---|
| Hardness | 60, 70, 80+/-5shore A |
| Elongation | 200% |
| Density | 1.9-2.1g/cm3 |
| Working Temperature | -40°C - +320°C |
| Top | Impression Fabric |
|---|---|
| Bottom | Adhesive 3M Glue |
| Cell | Close Cell |
| Material | Silicone Sponge |
| Hardness | 10-30shore A |
